8 Sections 2FDF series G3/8 inlet G1/2 outlet Hydraulic Gear Motor Flow Divider
 
Quick Detail:
 
Two or several gear motors can be combined to flow divider after being connected by coupling .It guarantees synchronous operation and accuracy of power element like cylinder .Its principle is as follows, hydraulic liquid from the pipe is input into the inlet port and the same amount liquid is distributed to the outlet port by the rotation of gears that with same specification.
Gear motor flow divider can be integrated with relief valve, check valve and governor valve, protecting system pressure and filling the oil. For specific requirements
 
Specifications:
 

* Flows listed above are per section
 
* stock units available in two and four section version
 
Charateristic featutres:
Gear flow dividers made of high resistance aluminium alloy.
These components can be used as flow equalizers, flow dividers and pressure intensifiers.
Displacements from 0.13 in³/rev (2,14 cm³/rev) to 2.01 in³/rev (33,03 cm³/rev) available in groups 10 and 20
Max. peak pressure up to 4060 psi (280 bar)

• Modular design
• Accurate division of flow
• Built-in relief valves
• Combinations between different groups
• High-strength permanent mold cast iron housing
• Precision needle bearings
• Precise machined trapping relief grooves provide constant filling and discharging to assure quiet operation and maximum bearing life.
• O-ring seals between sections (Buna-N